Geyser installation manual

Your geyser is one of the most important appliances in your home. Fortunately, you can prepare for a geyser failure with a little research. Usually, you can continue to use it after the event. Before you set out to replace your geyser, you may want to do some investigation.

Also, make sure that the isolator switch on the geyser is on. You may also want to check local switching times. The ripple relay may cause your electric water heater to turn off. You can also check to see whether you have a load shedding relay.

If so, it may have turned off your geyser. Next, check to see if your geyser is getting water. Alternatively, you may see water dripping from the expansion relief. Tap mixers and appliances use hot and cold water simultaneously.

If your home does not have balanced pressure, the cold water in these appliances can force the hot water back into the line. If this happens, the expansion relief valve will start to flow. In this case, you need to release the excess water and replace any damaged parts. In this case, you need to have a plumber examine your geyser system. Begin with a standard check. First, make sure that all the connections to the geyser are secure. Next, make sure that the safety valve pipes to the exterior.

Now check the seams at the front of the rear the geyser. Look for any signs of moisture or dampness. If you see condensation, it may indicate a leak. Also, check for moisture or dampness on pipe connections. You must also check the valves in the area under the geyser. If you have an older geyser, it may not have a drip tray. A drip tray catches water in small leaks under the geyser. The drip tray also protects the ceiling of your home.

Make sure the drip tray is present as well as if the drainpipe runs off the roof. You can save on costs when installing a new geyser by doing it yourself. Some older homes still have low-pressure Latco systems. The parts of the old low-pressure system are not interchangeable with a new high-pressure geyser. If your old model geyser has reached the end of its lifecycle, you need to replace it completely.

A geyser diagram can help you recognize the main parts of the system. You may also want to review a geyser pressure valve diagram. They also have a shutoff valve. After the shutoff valve, new high-pressure geysers incorporate a pressure control valve. The pressure rating of the valve must match the pressure rating on the geyser. You must have this valve on your high-pressure geyser. You must also have an electrical isolator switch. You must install the switch within one meter of the geyser.

Geysers also have supports under the feet. It supports the weight of the geyser on the roof trusses. Now you know how to install a geyser.

The best way to find a plumber is to ask around. Also, look at online reviews. Online reviews from previous customers can give you an idea of the quality of the work of a potential plumber. Savvy Plumbing has served Gauteng home and business owners for nearly a decade.

Whether you need a geyser installation or have a plumbing emergency, you can count on us for a job well done. We understand how important your geyser is for the proper functioning of your home. It's the smart way to select the products without reading buying guides Install the Android App now. Yes, you need to check the installation feasibility before you buy the Geyser model.

All the modern homes are well equipped with electricity inlet and water water inlet. But few bathrooms are arranging attic or false ceiling to optimize the space. You need at least 2 feets space to install vertical Geyser. So before purchasing vertical geyser make sure you have sufficient space else go for horizontal geyser. You can read more about horizontal vs vertical geysers. Install the Geyser from Authorized service center.

Many manufacturers provides the installation service. Many people do this mistake - buy online install offline. Service center will charge you around Rs - Rs including visit charges and installation charges.

The local plumbers on the contrary charges more than that and usually do not provide proper installation. As the manufacture service center people have expertise on installing their own Geysers, they are well aware of installation manual and safety and installation guidelines.

Local plumbers do not have that knowledge. Local plumbers do not read installation manual before installation. Once I was installing the Geyser at my home the local plumber simple removed the safety pressure valve saying it is useless. This resulted me in water leakage in future and service technician explained me the installation mistakes. First make sure your home is properly earthed.

Geyser electrical socket has proper earthing. The electricity connections should be behind the walls. Electricity power on off switches should be outside the bathroom. Geyser power inlet socket should have safe MCB overload protection. Make sure water pipes are clog free and unblock if there is a issue.

Check water connections before installing.